联系我们
河北宽大机械设备制造有限公司
联系人:康经理
手机:13503123532
电话:0312-8046966
地址:保定市清苑区石桥乡东石桥开发区
当前位置:电缆桥架及槽道安装要求
电缆桥架及槽道安装要求
[来源:http://www.dianlanguagou.com.cn] [作者:aywl] [日期:17-08-02] [浏览次数:]
(1)安装在活动地板或地面上,应固定在接线盒内,插座面板有直立和水平等形式;接线盒盖可开启,并应严密防水、防尘。接线盒盖应与地面齐平。 (1) installed on the floor or floor of the activity, shall be fixed in the junction box, and the socket panel shall have an upright and horizontal form; The junction box cover can be opened, and it should be waterproof and dustproof. The junction box cover shall be flush with the ground.   (2)安装在墙体上,宜高出在地面300mm,如地面采用活动地板时,应加上活动地板内净高尽寸。 (2) install on the wall, should rise above ground 300mm, if the ground USES the activity floor, should add the net height of the activity floor.   (3)信息插座底座的固定方法以施工现场条件而定,宜采用扩张螺钉、射钉等方式。 (3) the fixed method of the base of the information socket is determined by the conditions of the construction site, and the method of expanding screws and bolts shall be adopted.   (4)固定螺丝需拧紧,不应产生松动现象。 (4) fixing screws should be tightened and should not be loosened.   (5)信息插座应有标签,以颜色、图形、文字表示所接终端设备类型。 (5) the information outlet shall have the label, which shall indicate the type of terminal equipment in color, graphic and text.   (6)安装位置应符合设计要求。 (6) the installation position shall comply with the design requirements.
版权所有河北宽大机械设备制造有限公司 网址:www.dianlanguagou.com.cn 冀ICP备2022015529号-3
推荐:电缆挂钩,矿用电缆挂钩,矿用电缆夹,矿用电缆夹板,电缆夹h型电缆夹、o型电缆夹、u型电缆夹、c型电缆夹、日字型电缆夹等

友链:急流槽模具 六棱块模具 检查井钢模具 模锻件 网站建设及优化遨游网络