应用特性： Application feature: （1）该H型线夹主要用于制作预分支电缆或者施工现场分支。 (1) the h-clamp is mainly used to make pre-branch cables or construction site branches. （2）对于铝合金电缆，应选择铝合金材质的H型线夹，线夹中最好预填抗氧化油膏，否则安装时必须在连接位置涂抹抗氧化油膏。 (2) for aluminum alloy cable, should choose the aluminum alloy material of H clamp, clamp the best pre-filled antioxidant ointment, otherwise when installation, must be in the connection position daub oil of antioxidant. （3）铝合金材质的H型线夹可以连接铜芯电缆，但必须是在干燥的地方，并有足够的抗氧化油膏来密封连接部位。 (3) the H type wire clip of aluminum alloy can be connected to the copper core cable, but must be in dry place, and have enough antioxidant ointment to seal the connection. （4）H型线夹为模具压紧型连接，能凭肉眼直接观察到接触是否良好，比穿刺线夹或螺钉顶紧型分支器更能直观发现安装隐患。 (4) H type clamp for mould clamping type connection, whether can be observed directly by the human eye contact is good, than puncture wire clip or screw type top tight branch apparatus can more intuitive found hidden dangers. （5）H型线夹安装后恢复绝缘可以采用电工胶带缠绕，也可采用生产厂家提供的绝缘罩包覆，需防水时可采用防水胶带缠绕。 (5) H insulation can be used to recover by clamp installing electrical tape, also can use the manufacturer to provide insulation cover, when need to be waterproof, can use waterproof tape winding. （6）市面已有与之匹配的压接工具及模具，能保证很好的压缩比，可靠的连接。 (6) there are already matching tools and molds available to ensure a good compression ratio and reliable connection. （7）安装简易步骤： (7) install simple steps: a, 选择合适规格的H型线夹，将主线和支线分别放入H型线夹对应的位置。 A, choose the proper type H clip, and place the main thread and branch line in the position of the H line clip. b, 扳动两侧半圆块使其包覆电缆。 B, pull the side of the two sides to cover the cable. c, 用带有正确模具的压接钳压接，可从任意一端开始逐步向另一端压接（禁止先压两边再压中间）。 C, with the press with the correct mould, the press can be pressed from one end to the other.