产品展示
联系我们
河北宽大机械设备制造有限公司
联系人:康经理
手机:13503123532
电话:0312-8046966
地址:保定市清苑区石桥乡东石桥开发区
联系人:康经理
手机:13503123532
电话:0312-8046966
地址:保定市清苑区石桥乡东石桥开发区
当前位置:电缆夹的原理
电缆夹的原理
[来源:http://www.dianlanguagou.com.cn]
[作者:aowl]
[日期:18-05-03]
[浏览次数:]
电缆夹由夹体、弹簧、销轴和开关销等组成,夹体的H型上下内侧各开有一个导向槽,在导向槽的两端开有上下对应的4个方孔,夹体的一侧是两个并行的联接板,另一侧有一个联接板,在每个联接板上都开有相同孔径的圆孔。它的夹体采用了以钢板为骨架,表面溶注尼龙材料制成,外形则为中心牵引式不对称的H型结构。电缆夹固定电缆与水管的方法是采用弹簧卡锁固定方式实现的。本实用新型适用面广,可在高档普采与综采上使用。
The cable clamp consists of a clip, a spring, a pin shaft and a switch pin, and a guide slot is opened on the upper and lower sides of the H type. At both ends of the guide slot, there are 4 square holes corresponding to the upper and lower sides. One side of the clip is two parallel plates, and a joint board on the other side, and a circular hole with the same aperture on each joint board. Its clamp body is made of steel plate and made of nylon material on the surface, and its shape is a H structure with a center traction type. The method of fixing cables and water pipes by cable clamps is achieved by means of spring lock locking. The utility model has wide application scope and can be used in high-grade general mining and fully mechanized mining.
上一页:电线电缆基础知识
下一页:电缆的构造
关键字:电缆夹的原理