电缆固定夹具组成
Composition of cable fixing fixture
电缆固定夹具，又称电缆夹具，是一种电缆敷设、安装后用来固定电缆，使电缆占有正确的位置，防止因外力或自重导致电缆产生移动的专用夹具。电缆夹具固定作用是将电缆的重量和因热胀冷缩产生的热机械力分散到各个夹具上得到释放，使电缆免受机械损伤，对于夹头的固定，不同环境条件有不同的方法。通过电缆夹具的固定，确保敷设后的电缆排列整齐，不出现交叉排列现象，而且能够防止涡流损耗产生。
Cable fixing clamp, also known as cable clamp, is a special clamp used to fix the cable after cable laying and installation, make the cable occupy the correct position and prevent the cable from moving due to external force or self weight. The fixing function of the cable clamp is to disperse the weight of the cable and the thermomechanical force generated by thermal expansion and cold contraction to each clamp for release, so as to prevent the cable from mechanical damage. There are different methods for fixing the collet under different environmental conditions. By fixing the cable clamp, it is ensured that the cables after laying are arranged neatly without cross arrangement, and eddy current loss can be prevented.
电缆固定夹由三部分组成，第一部分为电缆固定夹，第流水槽模具 u型槽模具 电缆槽模具 隔离墩钢模具 护坡砖模具 钢制闸门 螺杆式启闭机 卷扬式启闭机二部分为固定夹支座，第三部分电缆夹具连接金具，螺杆、螺丝、垫片等。
The cable fixing clamp consists of three parts. The first part is the cable fixing clamp, the second part is the fixing clamp support, and the third part is the cable clamp connecting hardware, screw, screw, gasket, etc.